• Resin saturated, heavy weight braided fiberglass won’t burn, melt, or become brittle
• UL recognized
• Minimal dusting when cut & handled
• Cut and abrasion resistant
• Easy to install – cuts with scissors
• Resists gasoline and engine chemicals
Insultherm (FGN) is an extremely high temperature resistant sleeve commonly used as thermal protection for wires, cables and hoses that are subjected to continuous and extreme high temperature environments, such as engine manifolds and exhaust systems.
Insultherm is braided from fiberglass yarns and saturated with high temperature resins that improve the product’s stability and minimize irritating fiberglass dusting during cutting and installation. The sleeving is tough and durable, maintaining its tight structure under extreme vibration, abrasion, mechanical stress and temperature variations.
Insultherm is available in a wide range of diameters. It cuts cleanly with scissors and installs easily over a variety of applications to either deflect or retain heat in environments up to 650°C.
|Size inch||Size mm||Part #||Diameter Max||Wall Thickness Max||Bulk Spool|
|1/4″||6,4 mm||FGN0.25||9,5 mm||0,79 mm||61,0 m|
|3/8″||9,5 mm||FGN0.38||15,9 mm||1,09 mm||61,0 m|
|1/2″||12,7 mm||FGN0.50||19,1 mm||1,17 mm||61,0 m|
|5/8″||15,9 mm||FGN0.63||22,2 mm||1,17 mm||61,0 m|
|3/4″||19,1 mm||FGN0.75||28,6 mm||1,17 mm||61,0 m|
|7/8″||22,2 mm||FGN0.88||31,8 mm||1,17 mm||61,0 m|
|1″||25,4 mm||FGN1.00||41,3 mm||1,45 mm||30,5 m|
|1 1/2″||38,1 mm||FGN1.50||66,7 mm||1,55 mm||30,5 m|
|2 1/2″||63,5 mm||FGN2.50||104,8 mm||1,8 mm||30,5 m|