• Economical and easy to install
• Cuts easily with scissors
• Reflects radiant heat
• Insulates delicate wires and components
• Resists gasoline and engine chemicals
THERMASHIELD WRAP (TWN). When component disassembly isn’t an option, ThermaShield Wrap is the solution. Designed to fit securely around existing assemblies and hard to reach components, the flat material is joined along the edge with a strip of permanent, high temperature adhesive.
The aggressive bonding agent will securely adhere anywhere along the width of the material, affording maximum protection and allowing a snug fit around odd-shaped connectors and terminations.
ThermaShield Wrap creates a thermal buffer between your wires, hoses and cables and the high temperature environments surrounding them. ThermaShield Wrap is engineered by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation. This system provides superior protection from radiant heat by reflecting it away from sensitive electronics, wiring and hoses.
ThermaShield products will endure temperatures up to 650°C without delaminating, turning brittle or suffering adhesive failure. They are ideal in any situation where protection from radiant heat is a primary concern.
|Size inch||Size mm||Part #||Width Max||Wall Thickness Max||Bulk Spool|
|1/2″||12,7 mm||TWN0.50SV||46,0 mm||0,64 mm||61,0 m|
|3/4″||19,1 mm||TWN0.75SV||63,5 mm||0,64 mm||61,0 m|
|1″||25,4 mm||TWN1.00SV||85,7 mm||0,64 mm||61,0 m|
|1 1/4″||31,8 mm||TWN1.25SV||108,0 mm||0,64 mm||61,0 m|
|1 1/2″||38,1 mm||TWN1.50SV||127,0 mm||0,64 mm||61,0 m|
|1 3/4″||44,5 mm||TWN1.75SV||147,6 mm||0,64 mm||30,5 m|
|2″||50,8 mm||TWN2.00SV||169,9 mm||0,64 mm||30,5 m|
|2 1/4″||57,2 mm||TWN2.25SV||187,3 mm||0,64 mm||30,5 m|