• Economical, long lasting protection
• Easy, slip on installation
• Protects up to 650°C
• Halogen free
• Resists gasoline and engine chemicals
For decades, Techflex’s Insultherm braided fiberglass sleeving has been the first choice among automotive professionals and enthusiasts alike for many of their thermal protection applications.
These innovative sleeves offers high temperature protection in an easy slip on sleeve that will extend the life of expensive spark plug wires by protecting them where they need it most… at the boot. Just slip these 3/4” (19,1 mm) diameter double thickness (triple thick at the sewn end) sleeves over any spark plug cable and boot (even right angle boots) to protect them from engine temperatures up to 650°C. Once installed, the Insultherm Spark Plug Boot sleeves require no clearance from hot surfaces, and can even rest directly on hot exhaust headers without affecting performance.
Insultherm Spark Plug Boot Sleeves (SPB) are completely non-conductive, resist all engine chemicals, will not support combustion, and provide an easy, economical solution to the challenge of wire protection in the cramped, high temperature environment of any high performance engine compartment.
Length inch | Length mm | Part # | Diameter Max | Wall Thickness Max | Material | Ring | Bulk Box |
4 1/2″ | 114,3 mm | FBN0.75 | 19,1 mm | 2,16 mm | Fiberglass | – | 144 pcs. |
7 1/2″ | 190,5 mm | FCN0.75 | 19,1 mm | 2,16 mm | Fiberglass | – | 144 pcs. |
12″ | 304,8 mm | FDN0.75 | 19,1 mm | 2,16 mm | Fiberglass | – | 144 pcs. |
7 1/2″ | 190,5 mm | FCU0.75 | 19,1 mm | 2,16 mm | Fiberglass | X | 144 pcs. |
7 1/2″ | 190,5 mm | SCN0.75NT | 19,1 mm | 2,16 mm | Silica | – | 24 pcs. |
Questions? We're ready to help
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.